Om-Tech
Home / Postprocessors / EasyJET for Tecnocut 3 and 5-axis waterjet · Prisma control included

Your Tecnocut machine still cuts well. Now it can do it with today's CAM.

We have developed the postprocessor that connects EasyJET, DDX's waterjet CAM, to 3 and 5-axis Tecnocut machines, including those with Prisma control. It is already installed at about ten customers in Italy and abroad. The machine stays the one you know; what changes is the software you program it with.

Where we start

Great machines, software stuck in the past.

Hundreds of Tecnocut waterjet machines are still working around the world. Frames, pumps and controls are solid and do their job well. The software used to program them, however, is the one from many years ago.

Replacing the machine just to get modern CAM is a major investment. Updating the software costs far less and unlocks the potential the machine still has.

The machine stays

No mechanical changes: the new postprocessor writes programs for the control you already have.

The software changes

You program the machine from EasyJET, the waterjet CAM developed and maintained by DDX.

Prisma control

The first EasyJET postprocessor for Prisma.

Many Tecnocut machines have a Prisma CNC control and have stayed tied to the software they were born with. Our EasyJET postprocessor brings them to today's CAM, in 3 and 5 axes.

Controls
Prisma and OSAI
Axes
3 and 5
CAM
EasyJET by DDX
Installations
About ten customers in Italy and abroad, including FB Design and Vogten
Already running at FB Design · boatyard, Italy Vogten · stone fabricator, the Netherlands
What you get

More jobs from the same machine.

Current, supported CAM

EasyJET is DDX's waterjet cutting software, used every day on new machines.

3 and 5 axes

Postprocessors for 3-axis Tecnocut machines and for those with a 5-axis head, with Prisma or OSAI control.

Tested on the machine

Already installed at about ten customers in Italy and abroad. On your machine, we test it with your operator before delivery.

Training

We teach your programmer to use EasyJET on the jobs you do every day.

Om-Tech support

One contact for postprocessor and programs, remotely or on site.

Far less than a new machine

You pay for licence and postprocessor, not a new cutting line.

How it works

Four steps, without stopping production.

  1. Check

    You tell us your Tecnocut machine's model, year, axes and control. We confirm compatibility and send a quote.

  2. EasyJET licence

    We help you with the CAM licence, which is a DDX product.

  3. Installation and testing

    We install the postprocessor and test it on the machine with your operator, remotely or on site.

  4. Training and support

    EasyJET training and support whenever you need it.

FAQ

Before you ask for a check.

Which Tecnocut models does it work on?

3 and 5-axis Tecnocut machines with Prisma or OSAI CNC control. Tell us model, year and control: we check your configuration before any quote.

I have a Tecnocut machine with Prisma control: is it really possible?

Yes. Ours is the first EasyJET postprocessor for the Prisma control, and it is already in use at about ten customers.

Do I need to replace the CNC control?

No. The postprocessor generates programs for the control the machine already has.

Will the machine be stopped for long?

No. Testing is done with a few sample programs, at times agreed with you.

Who sells the EasyJET licence?

EasyJET is developed by DDX, whom we work with every day. We help you choose the right licence.

Do you work outside Italy?

Yes. Installation and testing can be done remotely, with the operator at the machine; training and support in Italian and English.

Free check

Tell us about your Tecnocut machine.

With model, year, axes and control we tell you whether your machine is compatible and what the upgrade costs.

  • Model and year (on the machine's nameplate)
  • 3 or 5 axes
  • CNC control (Prisma, OSAI or other) and the software you use today
  • The jobs you do most often

Tecnocut is a trademark of CMS S.p.A.; EasyJET is a DDX product. Trademarks belong to their respective owners.